ACEA
Association des Constructeurs Europeéns d’Automobiles.Successor organisation of CCMC and CLCA. Represents the European automobile industry in respect of operating supplies (fuel and lubricants). The specifications originally issued by the CCMC (organisation that proceeded the ACEA) are still valid: G 4, G 5, D 4, D 5 and PD 2. (See CCMC.)

ACTIVE INGREDIENTS (ADDITIVES)
Additives which are added to mineral oils, mineral oil products and synthetic oils as substances soluble in oil. As a result of a chemical and/or physical effect, they change or improve the characteristics of lubricants, fuels, heating oils, etc. in respect of characteristics such as oxidation stability, flow characteristics and anti-knock properties.

ADHESION IMPROVER
High-molecular hydrocarbons and highly polymerised compounds, aluminium soaps, etc., the purpose of which is to increase the cohesion inherent in the oil. Boosts adhesion properties of oil films on metal surfaces through structural viscosity characteristics, mostly linked to an increase in viscosity.

ADDITIVES
Oil-soluble substances added to lubricants to obtain and optimise certain characteristics. For example, through their chemical or physical action they influence: viscosity temperature characteristics, pour point, flow characteristics, oxidation stability, foam formation, detergent action, etc.

AGEING
Undesired chemical change in mineral and synthetic products during use and storage.

AGEING CHARACTERISTICS
These are used to assess the length of time for which lubricating oil can be used for the specific application.

AGMA SPECIFICATIONS
American Gear Manufacturers Association. Lubrication recommendations for open and closed industrial gear units. Classification into nine viscosity grades.

AIR FILTER OILS
Odour-free and ageing-resistant oils for cleaning the air intake (20 – 100 mm2/s40). White oils must be used for special systems.

ALUMINIUM COMPLEX LUBRICATING GREASES
are highly resistant to water, are easy to handle and hardly exude any oil. Have a high dropping point (to over 230°C) and good high-pressure characteristics. Application temperatures up to approx. 160°C.

ANTIFREEZE
Coolant, which in its concentrated form contains approx. 90% ethylene glycol and propylene glycol, inhibitors, additives, colorants and a very small amount of water. Specifications for coolant are what are termed company specifications stipulated by the individual vehicle manufacturers. They also specify the mixing ratios.

ANTI-KNOCK RESISTANCE
It specifies the performance (resistance) of a spark-ignition engine in respect of detonation during combustion in the engine: DIN 51 756 P 1 to P 6, RON (Research Octane Number), MON (Motor Octane Number), FON (Front Octane Number) and ROON (Road Octane Number).

ANTIOXIDANTS
Chemical additives that slow down the ageing of oil considerably.

ANTI-WEAR ADDITIVES
Active ingredients which aim to reduce wear in mixed friction areas; a distinction is made between:
a) Mild-acting additives such as fatty acids, fatty oils (highly polar, surface-active substances), metal dithiophosphates, etc.
b) High-pressure additives made of lead, sulphur, chlorine, phosphorous connections, etc.
c) Solid lubricants such as graphite, molybdenum disulphide, etc. – see EP additives.

API
The American Petroleum Institute classifies the requirements of various American engine manufacturers into a system of service categories (classifications). These differentiate between gear oils for passenger cars, engine oils for spark-ignition engines and diesel engine oils.
The American Petroleum Institute uses the following service categories:
API classification for engine oil (commercial categories)
Engine oils for diesel engines are classified into CA to CG categories. For these lubricant categories, too, the same evolution can be seen as for the service classes. Today we are particularly interested in CD categories for heavy duty diesel engines with and without turbocharging, CE for very heavy duty and high-speed diesel engines with and without turbocharging and sharply fluctuating loads. After 1994 CD was superseded by CF. The newly created CF-2 for two-stroke diesel engines and the CF-4 specification, which supersedes CE and defines additional values such as those that relate to volatility loss and piston cleanliness, are of interest. Since June 1994 the CG specification has also included emissions limits for the latest generation of engines. API classification for engine oil (service categories) These specifications are very common. Engine oils for spark-ignition (petrol) engines are classified in the categories SA to SH. SA generation products hardly used to contain any additives (non-compounded). The subsequent SB and SC generations contained mild compounds with active substances to prevent carbonisation, cold sludge, ageing, corrosion and wear. In 1968 the SD category satisfied the increased demands of the vehicle manufacturers. The next generations of SE, SF and SG engine oils for the toughest requirements met the requirements for more powerful engines and new traffic situations (stop-and-go traffic) in the 1970s and 1980s. Since 1993 the SH specification has been used. This also specifies the volatility loss (NOACK), filterability, foaming behaviour and flash point.

API CLASSIFICATION FOR PASSENGER CAR GEAR LUBRICANTS
Gear oils rated GL 1 to GL 5. A product with the required rating is used depending on the application, design of the gear mechanism and the load. For instance, GL1 is a non-compounded oil for gear trains and worm gears as well as helically toothed and spiral-cut final drives with minimal loads. Nowadays the greatest demand in the market is for GL 4 and GL 5 specifications. The GL 5 rating covers gear oils for highly loaded hypoid axle drives and, in some cases manual and special gearboxes as well. GL 6 oils for very highly loaded final drives have now been withdrawn.

AROMATIC HYDROCARBONS

Hydrocarbon compounds with cyclic molecular structures. They produce viscosity temperature characteristics (see VI) in lubricants and have a bad effect on resistance to oxidation. Added to fuel for spark-ignition engines to prevent combustion knock. The percentages added are increasingly being limited on account of their carcinogenic effect.

ASH
Mineral deposits that remain after lubricants have been burnt, in the form of oxides (oxide ash) or sulphate (sulphate ash after sulphuric acid has been added).

ASPHALT
A mixture made of bitumen and mineral building materials (sand, etc.).

AUTOMATIC TRANSMISSION FLUID (ATF)
ATFs are special lubricants with specific and high requirements for automatic transmissions. What are required are very good temperature characteristics and shear stability, high oxidation stability and excellent anti-foaming properties and air release characteristics. The specifications currently used are very extensive. Here are the most recent ones: GM Dexron III, FORD Mercon, MB 236.8, etc.

AVIATION LUBRICANT

Aviation lubricant which is adapted to the special requirements of the aircraft engine through its processing and composition. Mainly synthetic oils.
 

I agree
Settings

Your cookie policy

Settings
Privacy policy

You can choose not to allow some types of cookies to be set according to your privacy preferences.

Functional Cookies (necessary)

These cookies are essential for the website to function and cannot be switched off in our systems. They are usually only set in response to actions made by you, which amount to a request for services, such as establishing a session or setting your privacy preferences. These cookies do not store any personally identifiable information and they expire as soon as you leave the website.

Performance Cookies

These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. They help us to know which pages are the most and least popular and see how visitors move around the site. We use Google Analytics for this purpose. The data collected is not shared with any other party. The information we get through the use of these cookies is anonymised and we make no attempt to identify you, or influence your experience of the site while you are visiting it. If you do not allow these cookies, we will not be able to include your visit in our statistics.

Advertising cookies

These cookies are used by us and third parties to serve ads that are relevant to your interests. We use cookies to collect data about your online activity and identify your interests so that we can provide advertising that is most relevant to you. You can opt out of receiving interest-based advertising by leaving the checkbox above empty.

I agree
I do not agree
GENERAL INFORMATION

This privacy policy determines Lubrita Europe B.V., legal entity address World Trade Center Amsterdam, Schiphol Boulevard 127, 1118 BG Schiphol, Netherlands, the e-mail address info@Lubrita.com (hereinafter referred to as the “Manager") the conditions for the processing of personal data of web siteLubrita.com visitors and other data subjects, implementation of rights of data subjects, related to the processing of personal data.

The Manager may at any time review and change the privacy policy, so we recommend that you periodically check, whether you are familiar with the relevant version of the privacy policy. The date of current version publication of the privacy policy is specified on the top of this Web page. The information about changes to the privacy policy for registered users of online stores is available on their online store account.

Personal data of the website visitors are processed in accordance with the legislation in force and ensuring the appropriate technical and organizational measures for the protection of personal data.

The Manager uses provided your personal data or with your permission collected by the Manager solely for the purposes stated in the Privacy Policy, for the purpose of handling personal data, whether for payment or free of charge, transfer to other persons, except in the cases specified in this Privacy Policy. Your personal data may be disclosed to other persons only then and only to the extent that this is necessary in order to provide you with services, to fulfill your order, and so on. For example, when purchasing goods and choosing courier delivery, your personal data required for the delivery will be disclosed to the courier service. The website contains links to non-managerial websites. The Manager is not responsible for the privacy policies of these sites, so we encourage you to be active and get familiar with the privacy policies of the websites you are directed.

WEB SITE VISITORS' PERSONAL DATA, THE USE OF COOKIES

Cookies

The website uses cookies, small text files stored on your device‘s (such as a computer, mobile phone, tablet) browser when you are browsing a Web site.

We need to use cookies on the website in order to:
ensure the proper functioning of the Web site;
ensure optimal speed and security of the Web site;
check out the Web site and its individual pages and parts, to analyze Web site traffic (the date and time of visit, browsers used, types of devices and their screen sizes), and thus continually improve the Web site, in order to better meet your needs.
Improve your login to your online store account.

Data Manager uses the following types of cookies:

Session cookies:
TITLE: _gat | FUNCTION: Designed to speed up login. | EXPIRY DATE: By the end of the visit to the site
TITLE: CMSESSIDX | FUNCTION: Designed to support the user's session | EXPIRY DATE: By the end of the visit to the site
TITLE: CookiesAgree | FUNCTION: Designed to capture visitor's acceptance of cookies. | EXPIRY DATE: By the end of the visit to the site
TITLE: CookiesLevelx | FUNCTION: Designed to determine which type of cookies the visitor has accepted. | EXPIRY DATE: By the end of the visit to the site

Permanent cookies:
TITLE: _ga | FUNCTION: Google analytics cookie to identify unique users. | EXPIRY DATE: 2 years
TITLE: _gid | FUNCTION: Google analytics cookie to identify unique users. | EXPIRY DATE: 24 hours

You can restrict or block cookies by managing your web browser settings. If you want websites to not have any cookies on your device, customize your web browser settings so that you are notified before any cookie is placed or the web browser deletes all cookies. You will need to individually adjust settings for each Internet browser for each device.

Forbidding any use of cookies or restricting their use, you may not receive the services you want or cannot use the functionality of the website.

For more information about cookies, their principles of operation and settings can be found on the website http://www.allaboutcookies.org .

Requests

The web site has a request form that you can fill out with your request to the Manager. In order to respond to your request and save proof of communication, the Manager will in any case handle the information you provided: your name, email, and request. You will not be able to contact us by submitting a request without specifying this information.

If you want the Manager's representative to be able to contact you not only by e-mail, but also by telephone, you can also provide your telephone number with the request, but you can also submit the request without the phone number.

The personal data submitted with the request and the further correspondence between you and the Manager's agent will be kept to the extent necessary for the fulfillment of a specific task and to ensure the implementation of the rights of the Manager.

ONLINE STORE CUSTOMER PERSONAL DATA

Only the registered online store users following the conditions of purchase in the e-shop can purchase goods in the manager's online store.

The personal data provided by the registration is used to fulfill the orders (to implement the Manager's legitimate interest in being able to provide evidence of communication and agreements with buyers). In addition to the personal data provided at the time of registration, the Manager also stores your purchase history for the same purpose and legal basis: the purchased goods, their price, payment method and date, delivery method and date. The email provided by registering will also be used for the purpose of direct marketing in order to provide you with information about the goods and services offered by the Manager, provided promotions and practical advices, unless you express an objection during registration to the use of your personal data for direct marketing purposes. For more information on the processing of your personal data for direct marketing purposes, you will find at DIRECT MARKETING section of the Privacy Policy.

In order to be able to fulfill your order properly, you need to provide correct personal information when registering. You can view and modify your personal details by logging in to your online store account. Please, before submitting a new order, in all cases, verify that your personal data held by the Manager are relevant and correct. The Manager assumes no responsibility if your personal data will be disclosed to other persons, you will not receive any ordered goods or experience other inconvenience due to incorrect personal data delivery or non-renewal. No property losses will be compensated due to submission of improper personal data.

The personal data of registered at online store persons will be provided to the companies providing goods delivery services, banks, which handle billing for purchased goods or services, as well as to the data processors used by the Manager (the information system administrators used by the manager, the marketing services agencies).

You can cancel your registration at online store at any time by e-mail at info@Lubrita.com. Your account will be canceled no later than within 7 business days from the receipt of the sent confirmation email and you will be notified by email on the deletion of your account.

Your personal data processed for the purpose of electronic trading is stored for 5 years since the last time shopping in the online store. If you do not buy at online store for 5 years, your account will be deleted and all personal data contained therein will be deleted. You will be notified of the intention to cancel your account at least 5 days before the account is canceled.

PERSONAL DATA OF LOYALTY PROGRAM PARTICIPANTS

You become the Loyalty client of the Manager by acquiring a Manager Loyalty card under the terms of the loyalty program.

In order to become a loyal client of the Manager and to purchase the products distributed by the Manager at a more favorable prices, you must provide the Manager with the following information by registering in the loyalty program: name, email, telephone number and address. In order to become a member of the loyalty program you do not have to submit any other personal data.

In addition to personal data submitted by you, the Manager will also process the history of purchases made through a loyalty card, such as: purchased goods, their price, the discount applied, order date, payment method and date, delivery method and date. The legal basis for the processing of personal data processed for the purpose of carrying out the loyalty program is the desire to fulfill the contract for participation in the loyalty program.

Your personal data will only be used to provide you with discounts and make direct marketing offers. If you do not wish to receive news and information on promotions for loyal customers from the Manager, check in the "additional information" box when registering that you do not agree to the processing of your personal data for direct marketing purposes.

Your personal data processed for the purpose of performing a loyalty program will be transferred to the Manager's data processors (Administrators of Information Systems used by the Manager, Marketing Agencies).

You have the right to withdraw from the loyalty program at any time by submitting an application to the e-mail address info@Lubrita.com. For processing your participation in the Loyalty Program, your personal data will be erased no later than 7 days after the confirmation about sent receipt of the email and you will be informed by email about the deletion of personal data.

DIRECT MARKETING

Each Web site visitor can subscribe to the latest news about products and services offered by the manager, promotions and practical tips (subscribe to the newsletter).

By signing up to the online store, or a loyalty program you are also included in the Database of Recipients of the Manager's Newsletter, unless you state at the time of registration that you do not wish to receive Manager's Direct Marketing Proposals.

The persons that have subscribed to the newsletter and registered at online store, so the loyalty program participants may at any time refuse Manager's newsletter by clicking on the refusal link in the newsletter or by submitting a request to the e-mail address info@Lubrita.com.

VIDEO SURVEILLANCE

Video surveillance is provided in the territory and premises of physical Manager stores, located at World Trade Center Amsterdam, Schiphol Boulevard 127, 1118 BG Schiphol, Netherlands. The image is monitored in order to ensure the security of the Manager's assets and employees. The legal basis for the processing of these data is the legitimate interest of the Manager in preventing the occurrence of damage that the Manager would suffer if he lost his property or did not ensure the safety of his employees.

Observed areas and parts of the premises are marked with visual means visible before entering the video surveillance field.

The territory and premises of the Company are monitored only in real time; we do not record and store image data, so we will not be able to satisfy your requests for access to image data.

PERSONAL DATA OF CANDIDATES FOR THE EMPLOYEES

All personal data submitted by persons wishing to employ at Manager‘s Company are administered by the Manager only for the purpose of selecting and recruiting staff, having a legitimate interest in assessing the suitability of a candidate to work as desired.

In addition to the date provided on selection and recruitment purposes by the same person who wishes to work at the Managers Company, the Manager may collect and otherwise handle other publicly available candidate data, i.e., look for information online, check candidate social networks (such as LinkedIn, Facebook, Twitter) profiles and so on.

The Manager can also apply to the former candidate's employers, indicated in the candidate's CV or social networking accounts, and request information about the candidate's qualifications, professional abilities and business characteristics.

Submitted by the candidate and independently collected data about the candidate Manager keeps 4 months since the expiry of a specific employee selection. The term for the storage of personal data is prolonged only with the individual consent of the candidate. If the consent to keep the candidate's personal data for more than 4 months after the selection is not obtained, after the expiration of this term all the personal data of the candidate (both presented by the candidate and collected by the Manager) are deleted.

INFORMATION ABOUT THE RIGHTS

All persons, whose personal data are processed by the Manager, shall have:

The right of access to their personal data, processed by the Manager.
The right to request correction of incorrect or inaccurate personal data

Registered e-shop users can access their personal data and change them by signing up to an online store account. In other cases, the right of access and request for the correction of personal data shall be implemented by submitting a written request to the Manager's office address or to e-mail address info@Lubrita.com (in case of an application signed by e-signature).

The right to demand that the Manager restrict the processing of personal data until the accuracy of personal data is verified, until it is determined whether the interests of the data subject who disagrees with the processing of personal data are superior to the Manager, as well as in cases where personal data is processed illegally, but the data subject does not agree to delete this data.
This right is implemented by providing a written request to the Manager's office address or to the email address info@Lubrita.com (in case of an application signed by e-signature). If the application is reasonable, the processing of personal data will be limited within 5 working days from the receipt of the request.

The right to data portability
This right is implemented by providing a written request to the Manager's office address or to the email address info@Lubrita.com (in case of an application signed by e-signature).If the request is reasonable, the Manager submits to you or your designated data Manager your personal data in computer-readable form no later than within 30 days of receipt of the request.

The right to disagree with the processing of personal data
Registered e-shop users and loyalty program participants express the right to oppose the processing of their personal data for direct marketing purposes by abandoning the newsletter, clicking on the refusal link or by submitting an application to the e-mail address info@Lubrita.com. In all other cases expressing disagreement with the processing of your personal data will assess whether your legitimate interest is superior to the Manager.

The right to request deletion of data
This right is implemented by providing a written request to the Manager's office address or to the email address info@Lubrita.com (in case of an application is signed by e-signature). The data Manager shall delete the relevant personal data within the 30 days following the receipt of the request or refuse to accept the application and shall state the reasons for the refusal in writing.

The right to appeal to the supervisory authority
This right may be enforced by submitting a complaint to the State Data Protection Inspectorate regarding any actions of the Manager concerning the processing of your personal data.

In cases when you implement your rights by submitting a written application to the address of the Manager's office, a copy of the identity document (passport, ID card) certified by a notary must be submitted along with the application.

CONTACTS

If you have questions regarding the privacy policy, contact us info@Lubrita.com and we will help you.
Close
Close