Highly viscous mineral oils for impregnating insulating paper for high-voltage cables; sometimes mixed with waxes, bitumen, resins and pitch (filling compound).

a.) Substances which cause a chemical reaction (acceleration, retardation, direction) in other substances without the catalyst itself changing. In the petroleum industry, generally solid catalysts are used, e.g. cobalt, molybdenum, platinum, nickel, etc.
b.) Catalytic converters for combustion engines: when used in conjunction with a Lamda sensor and a control unit, this changes harmful emissions in exhaust gas (hydrocarbons CH, nitrous oxide NO and carbon monoxide CO) into non-polluting emissions (water vapour H2O, carbon dioxide CO2 and nitrogen N).

Cavities can be formed if, as a result of flow or vibration, the vacuum in a unit falls below the vapour pressure of the fluid used. When the vacuum drops, the microscopic bubbles that have formed suddenly liquefy (implode): This causes the destruction of metals, bearings, gear wheels, etc.

Committee of Common Market Automobile Constructors, association of European motor vehicle manufacturers. CCMC no longer exists in this form (see ACEA). The specifications issued by the CCMC are however still valid.

CCMC engine oil specifications: For spark-ignition engines (petrol/gasoline engines)

CCMC engine oil specifications: For diesel engines: The specifications listed were superseded by the new ACEA series after 1 January, 1996. Light 4-stroke diesel engines: B1-96, B2-96 and B3-96. Heavy diesel engines: E1-96, E2-96, E3-96 and potentially E4-96.

Unit of dynamic viscosity. (1 cP = 1 mPa s)

Unit of cinematic viscosity. (1 cSt = 1 mm2/s)


Microcrystalline waxes in soft, plastic, solid and hard consistencies, with colours ranging from white to yellow; the paraffin content depends on how it is to be used.


Measure to indicate the ignition quality of diesel fuel. It specifies the percentage by volume of cetane contained in a blend alpha methylnaphthalene at which the same ignition retardation is established as for the diesel fuel to be tested: DIN 51 773

Is the temperature at which - under specified test conditions - the separation of paraffin crystals causes a bright fluid product to become cloudy. To determine the cloud point: DIN ISO 3015

The cloud point of a mineral oil product is the temperature in °C, at which paraffin or another substance starts to separate from a medium, e.g. oil, when it is cooling down under specified conditions.

Residues are produced during vacuum distillation and in various crack systems that are heavier than heavy heating oil. Undesirable substances such as metal compounds, sulphur, nitrogen compounds, etc. are removed during pre-treatment in the coker before further processing.

This forms in the crankcase of engines that run at low loads and at low operating temperatures and is caused by combustion products and condensed water. Cold sludge can cause premature engine wear and engine damage.


Extremely small gelatinous particle which is distributed as very fine particles in another substance (soap solutions, oil emulsions, suspensions, etc.

Lubricating oils or greases which contain one or several active ingredients (additives) to improve special characteristics (see active ingredients), e.g. ageing stability, viscosity temperature characteristics, cleaning and dispersive effect (detergent, dispersive agent), load-bearing capacity or prevention of wear, corrosion protection, etc.

Mixtures of mineral oils and greases. The type and quantity of blended grease and oil depends on the application for the compounded oil (cutting oils, marine oils, cylinder oils, lubricating oils, etc.).

Compressor lubricating oils, used in air compressors with oil-lubricated pressure chambers without injection cooling. These lubricating oils can also be used in air vacuum pumps, which deliver pressure against a high atmospheric pressure. The lubricating oils are classified into different classes, depending on the application and the final compressor temperatures: DIN 51 506.

Also called formwork or mould oils. Application in the construction industry as a layer toseparate wood or steel formwork. Use as oil in oil-in-water or water-in-oil emulsion.

Dimension for the solidity or fluidity of lubricating greases; consistency classification of lubricating greases (NLGI classes) in accordance with: DIN 51 818. Determination of cone penetration: DIN ISO 2137; DIN 51 804 P 2 (see penetration).

Lubricants to cool and lubricate when cutting and, in some cases, shaping materials; cutting oils, metalworking fluids, water-miscible and water-mixed coolants, oil-in-water and water-in-oil emulsions, etc. Terms: DIN 51 385; Checking corrosion protection characteristics: DIN 51 360 P; emulsifiability resistance: DIN 51 367; determination of the part removable with acid: DIN 51 368, pH value: DIN 51 369.

Oils to dissipate heat in very different systems, e.g. rectifiers, etc.

These are fractions with closely limited vacuum distillation boiling ranges for lubricating oils for which certain base oil quality requirements are set.

This is a special mould oil for creating cores in a metal foundry.

Extremely alkaline metal sulphonates and phenates. They prevent the creation of rust on metal surfaces through the formation of surface films (absorption of polar surface-active substances which have a chemical and physical effect and thus prevent water and oxygen from penetrating to the surface of the metal) and/or neutralisation of acids.

Oils and greases to protect metal surfaces that are sensitive to corrosion against attack by moisture and atmospheric oxygen.

Cracking is the name given to the process that breaks the molecular bonds of hydrocarbons. Cracking is a process used in the petrochemicals industry to break down large hydrocarbon molecules by inducing internal oscillations through thermal and/or catalytic methods to produce new, smaller molecules of hydrocarbons.

Unleaded, degassed, desalinated petroleum from which water and solid contaminants have been removed.

Lubricating grease to lubricate plain bearings and sliding surfaces that are only subject to light loads at temperatures up to 60°C.

Coolants that cannot be mixed with water (metal processing oils) for operations to cut metal. The task of these oils is to lubricate, dissipate heat and remove swarf. Depending on the application, S, Cl, Pb, Sn, P, etc. are added. However, for a long time the cutting oils used have very largely been free of chlorine and heavy metals.

I agree

Your cookie policy

Privacy policy

You can choose not to allow some types of cookies to be set according to your privacy preferences.

Functional Cookies (necessary)

These cookies are essential for the website to function and cannot be switched off in our systems. They are usually only set in response to actions made by you, which amount to a request for services, such as establishing a session or setting your privacy preferences. These cookies do not store any personally identifiable information and they expire as soon as you leave the website.

Performance Cookies

These cookies allow us to count visits and traffic sources so we can measure and improve the performance of our site. They help us to know which pages are the most and least popular and see how visitors move around the site. We use Google Analytics for this purpose. The data collected is not shared with any other party. The information we get through the use of these cookies is anonymised and we make no attempt to identify you, or influence your experience of the site while you are visiting it. If you do not allow these cookies, we will not be able to include your visit in our statistics.

Advertising cookies

These cookies are used by us and third parties to serve ads that are relevant to your interests. We use cookies to collect data about your online activity and identify your interests so that we can provide advertising that is most relevant to you. You can opt out of receiving interest-based advertising by leaving the checkbox above empty.

I agree
I do not agree

This privacy policy determines Lubrita Europe B.V., legal entity address World Trade Center Amsterdam, Schiphol Boulevard 127, 1118 BG Schiphol, Netherlands, the e-mail address (hereinafter referred to as the “Manager") the conditions for the processing of personal data of web visitors and other data subjects, implementation of rights of data subjects, related to the processing of personal data.

The Manager may at any time review and change the privacy policy, so we recommend that you periodically check, whether you are familiar with the relevant version of the privacy policy. The date of current version publication of the privacy policy is specified on the top of this Web page. The information about changes to the privacy policy for registered users of online stores is available on their online store account.

Personal data of the website visitors are processed in accordance with the legislation in force and ensuring the appropriate technical and organizational measures for the protection of personal data.

The Manager uses provided your personal data or with your permission collected by the Manager solely for the purposes stated in the Privacy Policy, for the purpose of handling personal data, whether for payment or free of charge, transfer to other persons, except in the cases specified in this Privacy Policy. Your personal data may be disclosed to other persons only then and only to the extent that this is necessary in order to provide you with services, to fulfill your order, and so on. For example, when purchasing goods and choosing courier delivery, your personal data required for the delivery will be disclosed to the courier service. The website contains links to non-managerial websites. The Manager is not responsible for the privacy policies of these sites, so we encourage you to be active and get familiar with the privacy policies of the websites you are directed.



The website uses cookies, small text files stored on your device‘s (such as a computer, mobile phone, tablet) browser when you are browsing a Web site.

We need to use cookies on the website in order to:
ensure the proper functioning of the Web site;
ensure optimal speed and security of the Web site;
check out the Web site and its individual pages and parts, to analyze Web site traffic (the date and time of visit, browsers used, types of devices and their screen sizes), and thus continually improve the Web site, in order to better meet your needs.
Improve your login to your online store account.

Data Manager uses the following types of cookies:

Session cookies:
TITLE: _gat | FUNCTION: Designed to speed up login. | EXPIRY DATE: By the end of the visit to the site
TITLE: CMSESSIDX | FUNCTION: Designed to support the user's session | EXPIRY DATE: By the end of the visit to the site
TITLE: CookiesAgree | FUNCTION: Designed to capture visitor's acceptance of cookies. | EXPIRY DATE: By the end of the visit to the site
TITLE: CookiesLevelx | FUNCTION: Designed to determine which type of cookies the visitor has accepted. | EXPIRY DATE: By the end of the visit to the site

Permanent cookies:
TITLE: _ga | FUNCTION: Google analytics cookie to identify unique users. | EXPIRY DATE: 2 years
TITLE: _gid | FUNCTION: Google analytics cookie to identify unique users. | EXPIRY DATE: 24 hours

You can restrict or block cookies by managing your web browser settings. If you want websites to not have any cookies on your device, customize your web browser settings so that you are notified before any cookie is placed or the web browser deletes all cookies. You will need to individually adjust settings for each Internet browser for each device.

Forbidding any use of cookies or restricting their use, you may not receive the services you want or cannot use the functionality of the website.

For more information about cookies, their principles of operation and settings can be found on the website .


The web site has a request form that you can fill out with your request to the Manager. In order to respond to your request and save proof of communication, the Manager will in any case handle the information you provided: your name, email, and request. You will not be able to contact us by submitting a request without specifying this information.

If you want the Manager's representative to be able to contact you not only by e-mail, but also by telephone, you can also provide your telephone number with the request, but you can also submit the request without the phone number.

The personal data submitted with the request and the further correspondence between you and the Manager's agent will be kept to the extent necessary for the fulfillment of a specific task and to ensure the implementation of the rights of the Manager.


Only the registered online store users following the conditions of purchase in the e-shop can purchase goods in the manager's online store.

The personal data provided by the registration is used to fulfill the orders (to implement the Manager's legitimate interest in being able to provide evidence of communication and agreements with buyers). In addition to the personal data provided at the time of registration, the Manager also stores your purchase history for the same purpose and legal basis: the purchased goods, their price, payment method and date, delivery method and date. The email provided by registering will also be used for the purpose of direct marketing in order to provide you with information about the goods and services offered by the Manager, provided promotions and practical advices, unless you express an objection during registration to the use of your personal data for direct marketing purposes. For more information on the processing of your personal data for direct marketing purposes, you will find at DIRECT MARKETING section of the Privacy Policy.

In order to be able to fulfill your order properly, you need to provide correct personal information when registering. You can view and modify your personal details by logging in to your online store account. Please, before submitting a new order, in all cases, verify that your personal data held by the Manager are relevant and correct. The Manager assumes no responsibility if your personal data will be disclosed to other persons, you will not receive any ordered goods or experience other inconvenience due to incorrect personal data delivery or non-renewal. No property losses will be compensated due to submission of improper personal data.

The personal data of registered at online store persons will be provided to the companies providing goods delivery services, banks, which handle billing for purchased goods or services, as well as to the data processors used by the Manager (the information system administrators used by the manager, the marketing services agencies).

You can cancel your registration at online store at any time by e-mail at Your account will be canceled no later than within 7 business days from the receipt of the sent confirmation email and you will be notified by email on the deletion of your account.

Your personal data processed for the purpose of electronic trading is stored for 5 years since the last time shopping in the online store. If you do not buy at online store for 5 years, your account will be deleted and all personal data contained therein will be deleted. You will be notified of the intention to cancel your account at least 5 days before the account is canceled.


You become the Loyalty client of the Manager by acquiring a Manager Loyalty card under the terms of the loyalty program.

In order to become a loyal client of the Manager and to purchase the products distributed by the Manager at a more favorable prices, you must provide the Manager with the following information by registering in the loyalty program: name, email, telephone number and address. In order to become a member of the loyalty program you do not have to submit any other personal data.

In addition to personal data submitted by you, the Manager will also process the history of purchases made through a loyalty card, such as: purchased goods, their price, the discount applied, order date, payment method and date, delivery method and date. The legal basis for the processing of personal data processed for the purpose of carrying out the loyalty program is the desire to fulfill the contract for participation in the loyalty program.

Your personal data will only be used to provide you with discounts and make direct marketing offers. If you do not wish to receive news and information on promotions for loyal customers from the Manager, check in the "additional information" box when registering that you do not agree to the processing of your personal data for direct marketing purposes.

Your personal data processed for the purpose of performing a loyalty program will be transferred to the Manager's data processors (Administrators of Information Systems used by the Manager, Marketing Agencies).

You have the right to withdraw from the loyalty program at any time by submitting an application to the e-mail address For processing your participation in the Loyalty Program, your personal data will be erased no later than 7 days after the confirmation about sent receipt of the email and you will be informed by email about the deletion of personal data.


Each Web site visitor can subscribe to the latest news about products and services offered by the manager, promotions and practical tips (subscribe to the newsletter).

By signing up to the online store, or a loyalty program you are also included in the Database of Recipients of the Manager's Newsletter, unless you state at the time of registration that you do not wish to receive Manager's Direct Marketing Proposals.

The persons that have subscribed to the newsletter and registered at online store, so the loyalty program participants may at any time refuse Manager's newsletter by clicking on the refusal link in the newsletter or by submitting a request to the e-mail address


Video surveillance is provided in the territory and premises of physical Manager stores, located at World Trade Center Amsterdam, Schiphol Boulevard 127, 1118 BG Schiphol, Netherlands. The image is monitored in order to ensure the security of the Manager's assets and employees. The legal basis for the processing of these data is the legitimate interest of the Manager in preventing the occurrence of damage that the Manager would suffer if he lost his property or did not ensure the safety of his employees.

Observed areas and parts of the premises are marked with visual means visible before entering the video surveillance field.

The territory and premises of the Company are monitored only in real time; we do not record and store image data, so we will not be able to satisfy your requests for access to image data.


All personal data submitted by persons wishing to employ at Manager‘s Company are administered by the Manager only for the purpose of selecting and recruiting staff, having a legitimate interest in assessing the suitability of a candidate to work as desired.

In addition to the date provided on selection and recruitment purposes by the same person who wishes to work at the Managers Company, the Manager may collect and otherwise handle other publicly available candidate data, i.e., look for information online, check candidate social networks (such as LinkedIn, Facebook, Twitter) profiles and so on.

The Manager can also apply to the former candidate's employers, indicated in the candidate's CV or social networking accounts, and request information about the candidate's qualifications, professional abilities and business characteristics.

Submitted by the candidate and independently collected data about the candidate Manager keeps 4 months since the expiry of a specific employee selection. The term for the storage of personal data is prolonged only with the individual consent of the candidate. If the consent to keep the candidate's personal data for more than 4 months after the selection is not obtained, after the expiration of this term all the personal data of the candidate (both presented by the candidate and collected by the Manager) are deleted.


All persons, whose personal data are processed by the Manager, shall have:

The right of access to their personal data, processed by the Manager.
The right to request correction of incorrect or inaccurate personal data

Registered e-shop users can access their personal data and change them by signing up to an online store account. In other cases, the right of access and request for the correction of personal data shall be implemented by submitting a written request to the Manager's office address or to e-mail address (in case of an application signed by e-signature).

The right to demand that the Manager restrict the processing of personal data until the accuracy of personal data is verified, until it is determined whether the interests of the data subject who disagrees with the processing of personal data are superior to the Manager, as well as in cases where personal data is processed illegally, but the data subject does not agree to delete this data.
This right is implemented by providing a written request to the Manager's office address or to the email address (in case of an application signed by e-signature). If the application is reasonable, the processing of personal data will be limited within 5 working days from the receipt of the request.

The right to data portability
This right is implemented by providing a written request to the Manager's office address or to the email address (in case of an application signed by e-signature).If the request is reasonable, the Manager submits to you or your designated data Manager your personal data in computer-readable form no later than within 30 days of receipt of the request.

The right to disagree with the processing of personal data
Registered e-shop users and loyalty program participants express the right to oppose the processing of their personal data for direct marketing purposes by abandoning the newsletter, clicking on the refusal link or by submitting an application to the e-mail address In all other cases expressing disagreement with the processing of your personal data will assess whether your legitimate interest is superior to the Manager.

The right to request deletion of data
This right is implemented by providing a written request to the Manager's office address or to the email address (in case of an application is signed by e-signature). The data Manager shall delete the relevant personal data within the 30 days following the receipt of the request or refuse to accept the application and shall state the reasons for the refusal in writing.

The right to appeal to the supervisory authority
This right may be enforced by submitting a complaint to the State Data Protection Inspectorate regarding any actions of the Manager concerning the processing of your personal data.

In cases when you implement your rights by submitting a written application to the address of the Manager's office, a copy of the identity document (passport, ID card) certified by a notary must be submitted along with the application.


If you have questions regarding the privacy policy, contact us and we will help you.